Follow us :

The Automatic watch principle lets you easily master the Automatic watch

publisherDaisy

time2021/12/03

Automatic watch development history wrist watch tips The Automatic watch principle lets you easily master the Automatic watch
wrist watch tips
watch
Automatic Watch Principles- -Automatic Watch Type
1. Wobble type one-way upper bar;
2. Wobble type two-way upper bar;
3. Rotary one-way upper bar movement;
4. Rotate the two-way upper bar.
watch
Automatic mechanical watch principle- -the difference between semi-automatic and fully automatic
The drive weight hammer of the automatic mechanical watch of the automatic mechanical watch (i. e., automatic swing) is automatically wound through the arm.The swing automatic heavy hammer can only swing at about 120 in the meter machine, which is semi-automatic.Rotary automatic heavy hammer in the meter machine can do 360 rotary transport, called fully automatic, this is the principle of semi-automatic and fully Automatic mechanical meter.
Automatic watches and semi-automatic watches are called automatic watches, is in the automatic watch machine heart to add a set of automatic stripe mechanism, to replace the work of people stripe every day.Its automatic upper mechanism is an eccentric element- -an automatic cone and a set of gears.Automatic watch on the wrist, can use the arm of the arm, to achieve the purpose of tight hair stripe.The automatic bar mechanism is generally installed outside the upper splint. When we open the rear cover of the automatic table, we can see the automatic bar device.Therefore, from the appearance, automatic watches are generally thicker than ordinary watches.
Due to the different types of institutions on the automatic watches, it is generally divided into fully automatic watches and semi-automatic watches.Fully automatic watch Its automatic hammer center of the center, is generally located in the center of the watch machine.
team
company
When the watch is worn on the wrist with the arm activity, the automatic hammer under the action of inertia, it drives the automatic upper mechanism, around the axis in the positive and negative directions for the full weekly operation, the hair stripe is also slowly tightened to the ground.Because this kind of mechanism is dizzy in both positive and reverse directions, it can meet the upper requirements, so it is called a two-way upper mechanism.There is also an automatic watch, the automatic hammer can do full operation, but its upper function is one-way, generally classified as a fully automatic watch. A semi-automatic watch is an older automatic watch, and its automatic upper bar mechanism is made up of an automatic hammer, a set of gears, and a block splint
Automatic mechanical table principle- -automatic watch upper string
The vast majority of them are with eccentric pendulum tuo (automatic tuo or automatic heavy hammer), this thing is a bit like the construction of the ground with which "toad ram", its shape like a semicircular disc, choose heavy metal, and the edge is thick, so most of the quality is on the edge of the tuo, the use of the earth gravity and human arm swing and rotation, and drive a group of gears to roll the hair strip to string.

If you always do the office, exercise is insufficient, or you are older people, it is better not to bring an automatic watch, with the hand string is a depressed thing, but you have to do this, this is not the fault of the automatic watch itself.There is another important problem is that for the automatic watch, the accuracy is relatively good when the string is relatively good. If the watch stops, it is generally difficult to make the watch string completely.This way, the watch is always in a half string state, and your daily activity (upper string volume) can only compensate for the release of the watch clockwork. If your watch is 48 hours, your watch is always shipped between the length of 24 and 48.So you make sure to use the full stripe first, and then bring your automatic watch to put it in length at 0-24!